逆引きUNIXコマンド/ハードディスクの識別情報を表示する・hdparm
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
検索
|
最終更新
|
ヘルプ
]
開始行:
#navi(../)
* ハードディスクの識別情報を表示する・hdparm [#y2f55721]
hdparmコマンドを使用することにより、ハードディスクの識別...
以下、実際にhdparmコマンドを実行したときの結果等を記しま...
#contents
#htmlinsertpcsp(linux_ads_top.html,linux-sp.html)
* hdparm -I デバイス [#zf302310]
ハードディスクの識別情報を確認するためには以下の構文でhdp...
Ubuntuでhdparmコマンドを実行したので、sudoにてコマンドを...
sudo hdparm -I デバイス名
sakura@ubuntu:~$ sudo hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: VBOX HARDDISK
Serial Number: VBec19b38b-79b82855
Firmware Revision: 1.0
Standards:
Used: ATA/ATAPI-6 published, ANSI INCITS 361-2002
Supported: 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 20971520
LBA48 user addressable sectors: 20971520
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 10240 MBytes
device size with M = 1000*1000: 10737 MByt...
cache/buffer size = 256 KBytes (type=DualPortCa...
Capabilities:
LBA, IORDY(cannot be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no devic...
R/W multiple sector transfer: Max = 128 Current ...
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 u...
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY fl...
Commands/features:
Enabled Supported:
* Power Management feature set
* Write cache
* Look-ahead
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
Checksum: correct
以上、hdparmコマンドにてハードディスクの識別情報を確認す...
#htmlinsertpcsp(linux_ads_btm.html,linux-sp.html)
終了行:
#navi(../)
* ハードディスクの識別情報を表示する・hdparm [#y2f55721]
hdparmコマンドを使用することにより、ハードディスクの識別...
以下、実際にhdparmコマンドを実行したときの結果等を記しま...
#contents
#htmlinsertpcsp(linux_ads_top.html,linux-sp.html)
* hdparm -I デバイス [#zf302310]
ハードディスクの識別情報を確認するためには以下の構文でhdp...
Ubuntuでhdparmコマンドを実行したので、sudoにてコマンドを...
sudo hdparm -I デバイス名
sakura@ubuntu:~$ sudo hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: VBOX HARDDISK
Serial Number: VBec19b38b-79b82855
Firmware Revision: 1.0
Standards:
Used: ATA/ATAPI-6 published, ANSI INCITS 361-2002
Supported: 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 20971520
LBA48 user addressable sectors: 20971520
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 10240 MBytes
device size with M = 1000*1000: 10737 MByt...
cache/buffer size = 256 KBytes (type=DualPortCa...
Capabilities:
LBA, IORDY(cannot be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no devic...
R/W multiple sector transfer: Max = 128 Current ...
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 u...
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY fl...
Commands/features:
Enabled Supported:
* Power Management feature set
* Write cache
* Look-ahead
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* Gen2 signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
Checksum: correct
以上、hdparmコマンドにてハードディスクの識別情報を確認す...
#htmlinsertpcsp(linux_ads_btm.html,linux-sp.html)
ページ名: